PET-G CarbonLook from ROSA3D was created for prints where the visual effect of the object is more important than its industrial use. The small addition of carbon fibers used in the PET-G Standard material results in a print with a satin surface and almost invisible layers, with only a slight stiffening of the material. An additional advantage is the possibility of obtaining a slight transparency of the material in prints with very thin walls. Printing with PET-G CarbonLook is characterized by a low level of stringing and excellent adhesion between layers. Obtaining fascinating effects is as easy as in the case of PET-G Standard filament. The material does not shrink, does not require a closed chamber. Due to the low content of carbon fibers in the material, the abrasion of the filament is lower than in the case of PETG+CF material, which translates into less wear of the printing nozzle.

Recommended printing temperature 220-250 ° C.

Recommended table temperature: 60-80 ° C